BoxNovo

Pre-Roll Sizes: Cone Lengths, Tubes & Packaging Options

Quick answer: Pre roll sizes are named by cone length. The most common are 109 mm king size (about 1 g), 98 mm (about 0.75 g), 84 mm (about 0.5 g) and 70 mm dogwalker minis (about 0.25 to 0.33 g). Packaging tubes follow their own lengths, typically 90, 92, 98 and 116 mm, so […]

Pre-roll cone sizes from 70 mm mini to 109 mm king size alongside packaging tubes

Quick answer: Pre roll sizes are named by cone length. The most common are 109 mm king size (about 1 g), 98 mm (about 0.75 g), 84 mm (about 0.5 g) and 70 mm dogwalker minis (about 0.25 to 0.33 g). Packaging tubes follow their own lengths, typically 90, 92, 98 and 116 mm, so match the tube to the pre-roll you are filling, not to the gram weight on the label.

If you are choosing packaging for pre-rolls, size is the first decision. Pre roll sizes determine how much flower goes into each unit, which tube it needs, how many fit in a display box and how much label space you have to work with. Get it wrong and you end up with tubes that rattle, cones that will not close or cartons that do not fit the tubes inside.

This guide covers standard cone lengths, the difference between smoking tubes and packaging tubes, tube vs box vs multi-pack formats, child-resistant basics, label space and a short legal-market note. Dimensions come from published supplier specifications, so treat them as reference points and confirm them against the exact product you order.

What Pre Roll Sizes Actually Measure

Length in millimetres is the headline spec, but it is not the whole story. A pre-roll’s weight depends on the cone’s diameter at the opening and the base, the paper, the filter tip and how dense the flower is. Custom Cones USA explains that fluffy flower takes up more room than dense buds (an effect the tobacco industry calls filling power), so two cones of the same length can hold different weights.

That matters for two reasons. On an automated filling line, the twisting station is set by height, so flower that is too dense may not leave enough room for the cone to close. And in packaging, length and diameter decide whether a cone fits a tube, while weight only decides what goes on the label. Size your packaging by physical dimensions and label by net weight.

Standard Pre Roll Sizes by Cone Length

Four cone lengths cover most of the market. The table uses Custom Cones USA’s published specifications; other manufacturers can differ by a millimetre or so.

Pre-roll size Length Typical flower weight Diameter (opening / filter base)
King size 109 mm About 1 g 12.5 mm / 5.5 mm
98 special (standard) 98 mm 0.7 to 0.75 g 11.8 mm / 5.6 mm
Half-gram (“1¼”) 84 mm About 0.5 g 10.8 mm / 5.3 mm
Reefer (slim half-gram) 98 mm About 0.5 g 9.2 mm / 5.4 mm
Dogwalker (mini) 70 mm 0.25 to 0.33 g 10.2 mm / 5.2 mm

 

Weights are targets rather than guarantees, because the same 109 mm cone can hold slightly more or less depending on grind and density.

Four pre-roll cones in different lengths arranged from longest to shortest beside packaging tubes
Pre-roll cone lengths vary from standard king size to shorter mini formats.

King Size Pre Roll (109 mm)

A king size pre roll uses a 109 mm cone and is the standard format for 1 g pre-rolls. Custom Cones USA names it the most popular cone size and notes that it works with most pre-roll filling machines without special attachments. If you are searching for a 109mm pre roll, this is the length most 1 g products and most king size packaging tubes are built around.

Blunts use the same length. A 109 mm blunt tube holds about 1 g, and 2 g blunts keep the 109 mm length but widen the diameter to 11 mm. Pre-rolls rarely go longer than 109 mm; producers usually make them thicker instead.

98 mm Pre Roll

A 98 mm pre roll is the usual choice for products of roughly three-quarters of a gram. The same 98 mm length also appears as the slim “reefer” cone for half-gram rolls, so check the diameter before you assume which tube or carton it needs. According to Custom Cones USA, a 98 mm packaging tube suits both 98 mm and 84 mm pre-rolls, which makes it a flexible option for mixed ranges.

84 mm and 70 mm Minis

The 84 mm cone is the half-gram size, sometimes called 1¼. The 70 mm dogwalker holds about a quarter to a third of a gram and is mostly used for multi-packs, with a choice of 21 mm or 26 mm filter tips. For packaging, the pack count drives the dimensions: several minis share one tube or carton, so a five-pack and a three-pack need different layouts even though the rolls are identical.

Pre Roll Tube Sizes: Smoking Tubes vs Packaging Tubes

“Pre roll tube” means two different things, and mixing them up is a common ordering mistake. Supplier listings show 84, 98, 109 and 116 mm tubes, but those numbers describe different products.

Pre-rolled tubes (the product)

Cigarette-style tubes are the smokable product itself. Custom Cones USA lists 109 mm tubes for 1 g pre-rolls (9 mm in diameter) and 84 mm tubes for half-gram pre-rolls (8.1 mm in diameter). So 84 mm and 109 mm are pre-roll lengths, not container sizes.

Pop-top packaging tubes (the container)

Packaging tubes, also called doob tubes or pop-top tubes, hold the finished pre-roll. Custom Cones USA sells them in 90, 92, 98 and 116 mm, plus wide and double-wide versions at 114 mm for multi-pack formats. Their guidance is that the 116 mm tube is designed for a 1 g pre-roll or blunt, the 98 mm tube for about three-quarters of a gram, and the 90 mm and 98 mm tubes for half-gram and mini rolls. Gamut Packaging lists a 116 mm wide multi-pre-roll tube that fits five 98 mm pre-rolls. Some other suppliers also list shorter tubes, including 80 mm.

Pre-roll Common tube length Notes
109 mm king size (about 1 g) 116 mm The standard pairing for 1 g pre-rolls and blunts.
98 mm (about 0.75 g) 98 mm Also holds 84 mm pre-rolls, per supplier guidance.
84 mm (about 0.5 g) 90 or 98 mm Choose by how much headroom you want for the filter tip.
70 mm minis (0.25 to 0.33 g) 90 or 98 mm, or a wide multi-pack tube Pack count decides the tube width.
Multi-pack of standard pre-rolls Wide tubes (114 mm; 98 mm wide) Confirm exact capacity with the supplier spec sheet.

 

A tube’s nominal length is not always the same as its usable interior length, and filter tips, twists and wraps add bulk. Order a sample and test-fit your actual pre-rolls before committing to a full run, because filter tips and twists add bulk.

Clear, black, and white pre-roll packaging tubes with matching pre-rolls and a multi-tube display box
Pre-roll packaging tubes are available in different lengths and styles to accommodate individual pre-rolls and multi-pack formats.

Tube vs Box vs Multi-Pack: Choosing a Pre Roll Packaging Format

Once you know the pre-roll size and tube, decide how the finished product is packed and presented. Most pre-roll lines use one of four formats.

Format Best for Strengths Watch-outs
Single tube One pre-roll per SKU Child-resistant closure on the primary pack; protects the pre-roll; flat top suits a strain label. Needs a label and usually a carton for shelf impact.
Multi-pack 2 to 5 minis or standard rolls in one pack Several pre-rolls in one unit; works for 70 mm minis. Often needs a reclosable child-resistant closure; confirm with your regulator.
Display box of tubes Counter and wholesale display Common layouts are 15 tubes (3 rows of 5) or 16 tubes (2 rows of 8), per Custom Cones USA. Box dimensions depend on the tube’s diameter and layout.
Folding carton or retail box Branded retail presentation Space for artwork, product information and shelf presence. The carton is outer packaging; child-resistant certification belongs to the closure, not the printed box.

 

Once the tube is chosen, the carton is the next decision. Brands that want shelf presence around tubes or loose rolls can look at retail boxes for pre-rolls, while joint-style retail packaging suits products sold in a cigarette-style format. Mixed cannabis ranges often sit alongside other cannabis flower packaging, and hemp lines can use hemp pre-roll cartons. The wider CBD packaging range shows the other formats available.

Carton dimensions follow the tubes. Measure the outside diameter of your chosen tube first, then build the carton layout around it. Multiply it by the number of tubes across and the number of rows, then add an allowance for board thickness and any inserts. Our guide on how to size cartons explains how outside and inside dimensions differ.

Looking for tobacco pack counts instead? That is a separate topic, covered in our guide to standard cigarette pack counts.

Child-Resistant Pre Roll Tubes: What to Check Before You Order

There is no single federal cannabis packaging law, so the rules come from each state. Most regulated markets use the federal Poison Prevention Packaging Act protocol as the benchmark for child-resistant (CR) packaging, and the certification applies to the closure, not to the printed carton around it.

California’s Department of Cannabis Control gives a useful example. State law requires cannabis goods to be sold in child-resistant packaging. Flower and pre-rolls may use single-use CR packaging, meaning packaging that is child-resistant only until first opened, provided the package is labeled with the statement “This package is not child-resistant after opening.” Edibles, by comparison, need multiple-use CR packaging.

Other states differ on opacity, exit packaging at the point of sale and whether multi-pack closures must stay child-resistant after reopening. Before you order tubes, check these points:

  • Does the supplier provide child-resistant certification documentation for the exact tube and closure you are buying?
  • Does your state accept single-use child-resistant packaging for pre-rolls, or does it require a reclosable one?
  • Is a “not child-resistant after opening” statement required on the label?
  • Do multi-pack tubes need to remain child-resistant after they are opened?

When in doubt, a reclosable child-resistant closure is the safer default. For a deeper look at testing and options, read our guide to child-resistant testing rules. Always confirm requirements with the cannabis regulator in the state where the product will be sold.

Label Space on Pre Roll Tubes

Tubes offer very little label space, and what they offer is curved. Custom Cones USA describes its pop-top tubes as having a flat top for strain labels or for separating indicas from sativas, and it cuts labels on a tapered die-line so they sit straight on a tapered tube. A rectangular label on a tapered tube will wrinkle or drift.

Decide early which information must sit on the tube and which can move to the carton. Regulators set the required statements and warnings, so confirm those first and design the layout around them. A label sizing tool helps you check how much room the tube leaves for brand name, strain, weight and mandatory text.

How to Choose the Right Pre Roll Size and Packaging

  1. Set the target net weight: half-gram, three-quarter-gram, 1 g or a mini multi-pack.
  2. Match the cone length from the size table above, then confirm the diameter at the opening and filter base.
  3. Pair the tube: 116 mm for king size, 98 mm or 90 mm for shorter rolls, and a wide tube for multi-packs. Test-fit samples.
  4. Choose the format: single tube, multi-pack, display box of tubes or folding carton.
  5. Confirm child-resistant certification and your state’s label requirements before you finalize artwork.
  6. Size the carton around the tube layout, then add artwork, finishes and product information.

Legal-Market Note

Pre-rolls containing cannabis can only be sold in jurisdictions where cannabis is legal, and generally only by licensed operators. Federal and state rules are changing quickly. In April 2026, the Department of Justice moved marijuana covered by qualifying state medical licenses to Schedule III, while adult-use cannabis remains in Schedule I and a broader rescheduling process is still pending. For hemp, Congress delayed most of the new federal hemp definition, including the 0.4 mg total THC per container limit, from November 12 to December 11, 2026, and states such as Ohio and New Jersey have their own hemp rules.

This article covers packaging dimensions and general compliance considerations only. It is not legal advice, so confirm current rules with your state regulator and legal counsel before you launch a product.

Pre Roll Sizes FAQ

What is the most common pre roll size?

The king size, a 109 mm cone designed for about 1 g, is the most popular pre-roll size according to Custom Cones USA.

What size tube fits a 98mm pre roll?

A 98 mm packaging tube is the standard pairing for a 98 mm pre-roll, and Custom Cones USA says it also fits 84 mm pre-rolls. Order a sample to confirm the fit with your filter tip and twist.

Does a 109mm pre roll hold exactly 1 gram?

No. The 109 mm cone is designed for 1 g, but the actual fill depends on flower density, grind and filter type. Label the net weight you actually fill.

Are 84 mm and 109 mm tubes packaging?

Not usually. Those lengths describe cigarette-style pre-rolled tubes, which are the smokable product. Packaging tubes are typically sold in 90, 92, 98 and 116 mm lengths, with wide versions for multi-packs.

Do pre roll tubes have to be child-resistant?

In most states where cannabis is legal, yes. The exact standard, labeling and reclosability rules vary by state, so check with your regulator and keep the supplier’s certification documents on file.

Final Thoughts

Pre roll sizes start with cone length, but packaging decisions depend on diameter, tube fit, format and compliance. Pick the cone first, test-fit the tube, then build the carton and label around it. That order keeps you from redesigning artwork later.

BoxNovo Packaging Experts share practical insights on custom packaging, box styles, printing, labels, dimensions, materials, and product presentation. Our content helps businesses understand packaging options, choose the right solutions for their products, and create packaging that looks professional while supporting a stronger brand experience.

Leave a Reply

Your email address will not be published. Required fields are marked *